Home decor how to choose high-quality putty

Published: 16 May 2009 19:42:27

When people carry out home decorating, often think of the use of high-grade paint. In fact, high-grade paint will not necessarily achieve high-grade coating, and coating for high-grade, the high-grade coating has played only a smaller impact.

Well, apart from the impact of the effect of paint coating, are there any other than the coating plays a more important effect? That is coating the base material - "putty." Coating industry have called the old saying: "one-third of face and points at the end." Surface refers to the meaning of the role played by the Materials only quality into three, while the base material while the role of accounting. In general, the grass-roots level the role of material is mainly solid, flat and smooth. On this basis, the surface layer material the role of the principal are "colored", that is entrusted to the surface of color, played the role of aesthetic.

If the grass-roots level very good, even the mid-surface materials, similar to high-grade coating; the other hand, if the grassroots poor, even if the surface layer are high-grade materials, we can only make a middle of the painting. Therefore, in the home for decoration, in addition to attention to the selection of paint, but more importantly, the need to select high-quality putty. What kind of putty putty can be considered as high quality?

First, the bonded solid

At present, the vast majority of decorating company, are still using the original method of modulation putty, using this method modulation putty out of proportion because of improper measurement allowed, poor bond strength, can easily arise from skin, shedding the ills.

Second, the smooth and delicate

In general, the coating film formed after the coating thickness of only a few dozen silk, so smooth and delicate putty layer directly determines the degree of coating the surface of the degree of smoothness.

Third, good water resistance

Water-resistant putty quality decisions are often an important sign, water putty well not only in the musty, damp conditions also have good adhesion, but also to paint on the surface of the film will also have a big help.

Painting Notes

Base treatment:

1, the new wall: to ensure that all dust or foreign body was scratch-off. Need to ensure that the wall-free saline, oily material and Lung ridge. Construction to cover all the adjacent wall to avoid being sprayed. All cracks, spalling Department to Filling and leveling. In a formal firstpreviously recommended the use of anti-seal primer closed.

2, the old wall: This product facilities in the old wall shall ensure that a solid wall of the basement. When applying the first coating using aqueous washing soda walls, wash clean, until you can do afterfacilities.

Note: For more complex construction of the base surface, in order to ensure the best results, it is best to coordinate with the paint suppliers, in accordance with the actual situation in the design of the implementation plan accordingly.

Construction method: spraying by the spray gun and compressor to complete to ensure that no spraying be covered in advance. Roller coated by a decorative roller series to complete all kinds of texture patterns. Steel knives will be available mud on the wallthe goods with the plastic glossy wet roller or plastic mud knife to complete the final design effect.

Construction Environment: Construction of suitable temperature 5-40 degrees Celsius, humidity was 90% below requirements. Spray when the wind speed should be less than 6 m / s, air compressor for the pressure should be more than six kilograms.

Product features:

Approved the use of knives, roller or spray gun construction with smooth or texture effects products. Texture rich surface coating Color lasting, colorful.